Do RVers Really Need A Power Management System?

I see that question all the time on Facebook and most of the Blogs that I read.  For the simple, easy, straightforward answer, YES you do.  There are so many factors involved here that I can not possibly cover them all in a single post but, I would like to cover the basics so that you can better understand why you need a Power Management system of some kind.





1. You need to know what the AC (Shore Power) voltage is inside your rig.  This is the power that indirectly powers lights, water heater, microwave, furnace, charger for the 12-volt battery system, etc.  If the voltage gets below 102 volts and should stay there for a few minutes it would be possible to sustain approximately $1200 of damage or more.

So what do you need?  You will need an AC Line Voltage Monitor.  The unit shown below is plugged into an AC wall outlet that you can see and will monitor what the line voltage is.  If it should go below 105 volts you need to unplug your rig from the outside power pedestal until the voltage goes back to normal.

AC Line Voltage Monitor

So how do you know when the outside power pedestal is back to normal.  You plug the Voltage Monitor into the 125 volts two pin socket in the power pedestal and see what the monitor reads.  It should read 110 volts or higher up to 125 volts.  The same caution goes for overvoltage.  You should unplug the rig from the power pedestal if your Voltage Monitor begins to read over 122 Volts.  Plug the Voltage Monitor into the power pedestal and watch for the voltage to drop to below 122 Volts.
Could this monitoring of the voltage be done for less money?  Yes, by using a cheap Digital Volt Meter  pictured below;

 Digital Volt Meter  

Harbor Freight often offers a cheap digital voltmeter for free, with coupon.  Watch their ads and take advantage of the offer.  You could plug the test leads that come with the meter into the meter and then the other ends of the test leads into the slots on the AC wall socket. (Caution do not leave unattended) Or you could make up a cord from a 6-foot extension cord and the test leads that come with the meter.  See below for an example.

AC Cord With Test Meter Leads

2. Next is  The Polarity Tester.  This is used to be sure that the Neutral wire of the power line is not reversed with the positive lead of the power line.  If that were to happen you could have what is called a hot-skin condition.  Meaning that if you had an aluminum skinned rig you could receive quite a shock from your rig.

 The Polarity Tester

The Polarity Tester can also tell you if the Earth Ground (the bare copper wire) is hooked up properly.  
The Earth Ground is a separate conductor which may seem to be doing nothing but, is, in fact, a protective wire. It is there, ready to take the current away to earth ground, from the body or frame of the electrical device it is connected to, makes contact with any "hot" wire. [the 120 volts mains power is carried in two current carrying conductors called "hot" and "neutral".] 
So, IF one of the "hot" conductors should contact the metal frame of the rig, or housing of an appliance, perhaps because the appliance got damaged by being dropped from a table, or similar accident,  the third wire which is the earth ground wire, which runs directly from the housing to the grounding [or earth ground bus] in the fuse or breaker panel, will in effect cause a short circuit which should blow the fuse or trip the breaker. 
This third wire also guarantees a current path back to the electrical panel where the fuse or circuit breaker protecting that circuit is located, in the event that the hot wire should come in contact with the rig's frame, but the neutral conductor should happen to have been cut or damage and become disconnected, or open. 
The idea is to guarantee that if a part of the rig, device or appliance should become "hot," which could be fatal to anyone who then came into contact with it. That the earth ground would trip/open the circuit protection device [fuse or breaker], and turn off the flow of AC current. 

To help further in checking for unwanted or wanted electricity a good investment is the, Voltage Sensor which is shown below;

 Voltage Sensor

With this probe, you do not need to touch the power line to tell if there is voltage present.  You can use this probe to find power lines behind the wall or under the floor of the Rig as well as the towing vehicle.

3.  Often times you want to know or need to know how much power something uses, especially if you keep popping a breaker or the power pedestal. The solution is Kill-A-Watt .  The unit shown below can be used to show how much power an appliance, tool or piece of electronics is using.

 Kill-A-Watt

4. Next, let's look at surge protectors for the various pieces of equipment in your Rig.  Surge Protectors protect only what is plugged into them and only for over-voltage surges.  Surge Protectors do not protect for under voltage or high voltages.  Shown below is a pair of good simple surge protectors;

Surge Protectors

There are Appliance Surge Protectors made just for appliances like microwave and coffee makers

 Appliance Surge Protectors

AC refrigerators, freezers. 

Refrigerator/Freezer Surge Protector

These special surge protectors offer extra features like audible alarms, flashing lights, displays, etc and are to be used with just the items listed on the packaging for the one you would buy.

5.  Next is a group of power management items that will protect your entire Rig not just one item or several items in it. First is the Portable Power Management System This type of system looks at High and Low voltage protection, a time delay for air conditioning compressor startup, 3-mode surge protection, reverse polarity protection, open neutral protection, open ground protection, AC frequency protection accidental 220 Volt protection. Includes an Integrated information panel, previous error code display is weather resistant and has a built-in locking bracket so it can be chained to the power pedestal at the campground to prevent theft.  The only thing this unit cannot do is flush the black water tank.  The miracle unit we are talking about is shown below.

30 Amp RV Surge Protector

These portable units come in two sizes the one above 30 amp and the one shown below 50 amp.

50 Amp RV Surge Protector

Let's say you were involved in a lightning-caused power surge at a campground.  It is estimated you would suffer approximately $3000 to $5000 worth of damage to the electrical system of your Rig along with the things plugged into it.  The features of the 50 amp unit are the same as the 30 amp unit.
Ah, but there is more!  What happens if you do not want something portable but something more permanent in the Rig? Then you have the permanently installed units which are called Fixed Power Management Systems  These units are not really a DIY type of item but, they can be installed by the DIYer if care is taken during the installation.  The 30 amp model is shown below;

 30 Amp Fixed Power Management Systems

There is also a 50 amp version of the same unit as above and can be found here;  50 Amp Fixed Power Management Systems .  The features of both units are the same and are,  high and low voltage protection, time delay for air conditioning compressor start-up, 3 mode surge protection, surge trip indicator, reverse polarity protection, open neutral protection, open ground protection, AC frequency protection. Accidental 220V protection, with remote information display panel, and unit bypass switch.  Unfortunately, this unit also does not dump the black tank.

I hope that you now have come to the conclusion that some type of power management is needed to protect your Rig, its contents and YOU!









Until Next Time

And finally, please remember that this blog is an Amazon affiliate. When you order something through any of the Amazon links, it doesn’t add anything to your cost, but I do earn a small commission on everything you buy. Just click on an Amazon link, then shop as usual.

Improve Your Over The Air HD Reception

If you are RVing for just a weekend or full timing it, the chances are good that you will be within the range of one or more HD TV channels.  The problem is that most of us just can't seem to get enough signal to watch TV.  Heaven forbid that it rains and you would need something to entertain the kids besides a good book.






Most RVs come with a crank-up antenna like the following.

While this antenna is a good one, it was designed for mostly VHF analog TV reception.  (The old style TVs.)  Most of the TV reception today is UHF digital and calls for a bit more antenna.
Winegard has solved the problem with the addition of the Wingman below.

Wingman HD TV Add-On



This unit attaches to your current Winegard crank-up antenna and really does boost HD TV reception.  No special tools are required to attach it to your current antenna.  Just follow the instructions that are included with the antenna.
I have added one of these Wingman Antennas to my crank-up RV antenna and have really seen a major improvement in the number of channels that I can receive as well as the strength of the signal on the channels that I could always get.

Let's talk about the maintenance of your crank-up antenna.  At least once an RV season you should get up on the roof of the RV and lubricate all the swivel points on the crank-up mechanism.  I have used  White Grease in the past but this year I am going with T9 Lube which is a bit less messy than the white grease.

Now that you have a great HD TV Antenna you might need some help pointing your TV antenna for better reception of local stations, try this link: Maximize your television reception.  Follow the instructions,  just enter the zip code where you are, or use the map to place a pin where you are and the site will tell you the best direction to get the strongest local TV signals. Be sure to tell the program that the antenna will be mounted more than 30ft in the air to get all the TV channels.  Along with a list of the TV stations within range.

Have you read stories about RVers forgetting to crank-down their TV antennas and losing them to a tree?  Here is an idea to stop that.

RVminder Tags

This kind of idea has worked for me.  You could use some brightly colored ribbon and just write Antenna on it and attach it to the crank handle of the antenna and put a second reminder in the towing vehicle.  Anything to remind you to crank the antenna down.



Also, do not forget to check the antenna amplifier switch is you are having problems with off the antenna reception.  When you switch from park satellite/cable you will need to turn the antenna amplifier back on.  Most RV parks request that you turn the antenna amplifier off when hooking up to the parks system.

Until Next Time.

RV Humidity -- An RV Rig Killer!

A strong title, but true.  One of the major killers of RV walls is moisture in the form of humidity.  You don't even have to be using your RV it can be sitting in storage and humidity can still be present on the inside above a safe level.  Mold depends on moisture to grow and flourish. What is a person to do?  Well, the safe level of humidity for an RV is 40% or thereabouts.  So the first thing you need to do is know your current humidity level and the best way to know that is with a humidity monitor.

Humidity Monitor

In the photo for the Humidity Monitor, the screen is showing 53% which is not acceptable for an RV.  The reading shown is more likely a Sticks&Bricks house.
Now that you know what the humidity is.  What can or should you do if it is not right.  You need to try and find out the source of the moisture causing the high humidity.  People give off moisture when we breathe, but getting rid of all the kids is not an option be they fur or not.

Next showers or taking a bath gives off moisture.  Be sure that the bathroom fan is turned on during the bathing process, even in the colder months.  Wipe down the shower and bath area to reduce the amount of moisture that is evaporated back into the air of the RV.

Cooking is another moisture generator.  Keep lids on pans when cooking, to keep the moisture down, open a window a bit to let the warm moist air out, and turn on the kitchen vent if you have one.  Many of the newer RVs do not vent the stove vent to the outside.  This is not good, as an inside vented stove hood keeps the moist air inside the RV.  Do not let a tea kettle steam longer that is necessary.  Don't leave a coffee pot running all day long.  Make a cup as you need it or the coffee pot will add to the humidity in the RV all day long.

Try to locate any seals in the RV slides that is letting in outside air and seal that area.  You can cut strips of foam insulation like Reflectix or other foam insulation.  If you find caulking around the tub or shower stall or even around the kitchen/ bathroom sink is missing or cracking re-caulk using 100% silicone sealant like shown below.  This keeps water from going in the RV wood structure or supports where, if conditions are right, mold will start to grow.

100% Silicone Sealant

If it is during the colder months and your RV has single pane windows you might add Bubble Wrap to the windows.

Bubble Wrap

To install the bubble wrap do the following.

Cut the bubble wrap to the size of the window pane with scissors.
Spray a film of water on the window using a spray bottle.

Spray Bottle

Apply the bubble wrap while the window is still wet and press it into place.
The bubble side goes toward the glass.
To remove the bubble wrap, just pull it off starting from a corner.

This bubble wrap will help insulate the inside of the window from the outside of the window to further reduce moisture forming on the inside of the window when the outside air is colder than the inside air.

Do you dry clothes in the RV by hanging them in the bathroom?  Did you remember to turn on the exhaust fan?  It is not wise to dry clothes in the RV during the colder months because drying clothes adds to the amount of moisture inside the RV.  Do you have a combination washer/dryer?  Make sure the dryer is vented to the outside.  If you do not the dryer will add to the moisture in the RV.

If it possible let the RV inside temperature drop a bit in colder weather so the air inside the RV will hold less moisture.  Cooler air holds less moisture than warm air.  You may have to dress a bit warmer, but your RV investment will thank you for being a bit cooler.

Poor air circulation inside the RV can make mold grow in drawers, closets, and even cabinets.  Keep the air moving even when you are not inside your RV.  How may you ask? You can open two or more roof vents or a roof vent and crack a window so that air naturally flows in and out.  You can add a MaxxAir vent cover

MaxxAir Vent

over your current roof vents so that you can keep your vents open without rain or snow coming in the RV when the roof vent is open. You should put your RV in storage with vents cracked a little bit to allow for air movement.

If your RV does not have LED lighting you could swap out your current incandescent light bulbs for the LED equivalent.  This will reduce the about of air heating that the hotter incandescent bulbs are known for.  There is an LED replacement light for most all of the RV incandescent bulbs used in RVs. As an additional benefit, your RV battery will last longer during dry camping with LED lighting and depending on the LED light you buy you may find that the inside of your RV is now brighter with the lights on.

OK, we have talked about what not to do and some of what you can do to reduce moisture in the RV now let's get serious about stopping or greatly reducing moisture in your RV.
1. Get a dehumidifier.  They come in several sizes and types.
The ezest one to do business with is the bead type.

Eva-Dry Dehumidifier Beads

Twin Pack resealable packaging
100% silent operation
Lasts 45-60 Days
Indicator beads let you know when it's ready to be discarded.

You can spot these around the RV and in closets, cabinets, drawers where ever you feel or think moisture may be lurking.
Next, you have the mechanical dehumidifiers.

Eva-dry Electric Petite Dehumidifier Edv-1100, White

Whisper quiet
Renewable reservoir
Compact size is perfect for bathrooms, closets, and R.V.s
Low energy consumption
One of these usually works but if you have a severe problem you may want to consider two of them.

If you have an RV more than 36 feet long you may want to consider this one.

Ivation IVADM35 Powerful Thermo-Electric Dehumidifier

Squeezes Up to 20 oz. of Water a Day From Humid Air
Very Quiet Operation Due to No Moving Parts
At Capacity, Indicator Lights Up and Device Shuts Off
Compact at 4.45 pounds, 6.8" x 8.5" x 14"
For bunkhouse RVs,  you will need two.

And if you really need more moisture removal you can use a sticks and bricks type unit.

Keystone Energy Star 70 Pt. Dehumidifier

Removes up to 70 pints of moisture from the air per day
1.3-gallon water tank with transparent water level indicator, full bucket alert, and automatic shut-off when full
Removable, easy-cleaning dust filter with a clean filter alert
4 durable, rolling casters for easy movement

 It is generally felt that combinations of dry and mechanical work the best.

Well, that should about do it for this topic.  I hope you found the information helpful and can use some of the ideas presented.

Until Next Time







And finally, please remember that this blog is an Amazon affiliate. When you order something through any of the Amazon links, it doesn’t add anything to your cost, but I do earn a small commission on everything you buy. Just click on an Amazon link, then shop as usual.

RV Security On The Road And In Storage

It is that time of year again when most of us will have to store our RVs until next Spring. We all do the Winterizing like we are suppose to.  But how many of us even worry about someone coming along and stealing our RV?  Well, we should.  Let's take a look at what you can do to protect your, very expensive RV from being stolen.
Because I live in the city, I can't store my Open Range 3X anywhere on my property or on the street. So like a lot of city dwellers I have to put my RV in storage when I am not using it.  To my shock and amazement, two units were stolen right out of the storage lot that I use.  To add insult to injury, the storage lot had a guard on site, a security system for entrance, and security cameras.  But the same guy managed to get two units out of the locked lot.  Well, thanks to the security cameras they caught the guy.  But what can you and I do to make our units harder to steal and more secure.  Let's look.





First, we can add a lock to the ball area of a TT and a 5th Wheel Hitch Lock. Let's look at both.  The TT ball lock looks like below.

TT ball lock

• One size fits all (from 1-7/8", 2", to 2-5/15", all coupler types)
• Keyhole cover slides up to seal out dirt and grime
• Type A key which is a spring loaded, 7 pin, high-security key. Resists attempted drill outs. Rugged and durable, the key will not bend or break.
• Huge 6 tooth, 3/8" dual ratchet locking system
• Hardened 5/8" 16mm steel shackle

Now that should slow down anyone trying to take the TT quickly.  Now let's look at what can be done to slow down the would-be thief stealing a 5er.  See below for the 5th Wheel Anti-Theft device

5th Wheel Anti-Theft device

This unit slides over the hitch pin and prevents the hitch pin from being attached to, by the hitch receiver. Simple but effective to slow down our would-be thief.

I think we could do more. How about we lock the tires so the RV cannot be moved without putting new tires on the RV? Shown below is an RV Dual Wheel Stop with Padlock

 RV Dual Wheel Stop with Padlock

• Secure tandem tires to prevent movement while parked or re-hitching
• Fits 26" to 30" diameter tires with tire spacing of 3-1/2" to 5-1/2"
• Includes, padlock
• Easy grip handle for easy installation
• Lightweight and durable

This should slow them up but what about something even better?  Let's look at the X Wheel Stop with Padlock.

 X Wheel Stop with Padlock.

While the lock for this heavy-duty unit is extra (a Master Lock, that you supply) it will be well worth it if it slows down someone trying to take your RV.  In most cases, if it is hard to take or time-consuming to take the thief will move on to easier pickings.

We have protected (to the best of our ability) someone trying to take your RV but what about protecting the expensive stuff inside the RV and in the storage bay.  Let's take a look on how to help protect those areas.

First the entrance doors.  Did you know that the key to your RV has been duplicated many times by the manufacturer of your RV?  Did you know that almost any thief can come up with a key that fits your RV doors?

So let's look at a lock that is a bit safer. The Keyless RV Door Lock

Keyless RV Door Lock

• No wiring needed; uses 4 AA batteries (not included) It's retrofittable in most RV entry doors and it's easy to install.
•  Programmable with a 4 digit PIN number The large buttons are easy to see and use Proximity sensing which illuminates the buttons.
• Self-contained electronic RV latch with Capacitive Touch Technology
• Offers hassle-free touchpad access: no key or fob to carry with you.
• An integral touchpad to the latch which controls the deadbolt
• Deadbolt key will always be able to operate the paddle or deadbolt lock in case of the user forgetting the code or having a dead battery, 8-inch x 5-inch x 4-inch.

You don't even need a key to get this lock to open after you enter your personal pin number.  So it will not be a big deal if you lock your keys in the RV. By mistake, of course.

Let's take a look at the outside storage compartment locks.  Did you know that's the lock code for your storage compartment lock is CH751?  This is the most common lock used on TT and 5th wheels today.  So anyone can get in. Let's look at a better idea. The RV Storage Compartment Combi Lock.

RV Storage Compartment Combi Lock

• Cylinder length 1-1/8"" - accommodates material thickness up to 7/8" thick
• Durable solid metal
• 1,000 possible combinations- set your own code
• Retrofits any standard cam lock
• Comes with 3/4" prong washer, 1-1/2" offset cam, 3/4" straight cam, 1-1/2" straight cam and a 90 degree stop.

This type of lock is a direct replacement to what comes on most TTs and 5ers. You take off the old one and measure the hole opening and the length of the shaft and order the same size as the one you have.

Follow the installation instructions and you are done. A really simple install.

Until Next Time



And finally, please remember that this blog is an Amazon affiliate. When you order something through any of the Amazon links, it doesn’t add anything to your cost, but I do earn a small commission on everything you buy. 

Propane Gas Saving Tips

I am sure most of you have noticed that gas of all kinds including diesel fuel is going up in price.  Many of us would like to stretch our Propane Gas as far as possible.  Well, there are some basic tricks of the RV lifestyle that can help you do just that.  You must have access to AC power (shore power) to make these tricks work.

The first one has to do with your hot water heater.  If your unit is a dual operating type (AC and Propane) force your unit to use AC whenever possible by shutting off your propane tanks. Turn your hot water heater off overnight.  The tank will keep the water hot to warm all night.

But your comment is, how will I cook anything?  The answer to that follows.

Second is to use induction cooking.  An induction cooktop uses magnetic energy to heat and cook whatever is in a pot or pan that a magnet can stick to.  For example, this Deluxe Burton Induction Cooktop is what I have and it works just great.  This is what it looks like;

Deluxe Burton Induction Cooktop

Here are some of the features of this Induction Cooktop ;

• 1800-watt high-quality induction cooktop provides 10 power levels
• Push-button controls and digital display; 180-minute timer with auto shut-off
• 10 temperature settings; overheat sensor; in-line fuse
• For use with induction-compatible cookware; the unsuitable-cookware detector
• Measures 13-2/7 by 12-1/2 by 2-3/5 inches

As mentioned in the features of the cooktop you must use cookware that a magnet will stick to.  Most cookware today is aluminum and so would not work.  You do not need a completely new set of cookware just enough to get by with using the induction cooktop.

Here is an example of Induction Cookware shown below;

Induction Cookware 

Any cookware will work as long as a refrigerator magnet will stick to the bottom of the pan or pot.  Here is a chance to go to Goodwill or other secondhand shop and make a killing on induction ready cookware.  Just be sure to bring your refrigerator magnet with you.

But you are a baker by trade and need to often use the oven that came with your Rig for that purpose.  What are you to do?  Well let's look at a solution called the Infrared Countertop Oven shown below;

Infrared Countertop Oven

Some of the features of this innovative oven are shown below;

• Digital-controlled infrared oven cooks food quickly and easily
• Cooking methods include conduction, convection, and infrared radiant heat
• No preheating, defrosting, or ventilation needed; dishwasher-safe parts
• Extender ring, cooking rack, baking pan, manual, and recipes included
• Measures approximately 14 by 14 by 16 inches
• 3-inch Extender Ring, 2-inch rack, 10-inch baking pan 
• Cooks up to a 16 Lb. turkey /141b ham with Extender Ring

So now we have the baking taken care of and we are not cooking with gas but electricity and so are saving gas and bucks ($). 

I heard you lady in the back row.  You are cold at night and need some heat so turning off the Propane gas is not an option.  Let's look at some options here as well.  

You could put one of these Mattress Heating Pads on your bed and plug into electric and sleep warm as toast all night.  These heated pads come in all the popular sizes King, Queen, and Twin.  I have shown the queen size below;

Mattress Heating Pads

Because heat rises this mattress type heating pad is much better than a heating blanket and will use less power to keep you toasty warm during the cold night. 

Ah, but you need to heat the Rig so you need more power, I mean heat.  Then you want a Ceramic Space Heater  This type of heater generates a lot of heat for very little electricity used.  The one pictured below is what I use.  I have a 30ft TT and use two of the Ceramic Heaters. One blowing toward the bedroom and one in the living room blowing toward the kitchen.  These heaters will cook you out of the Rig, they can generate so much heat.  I winter camp in North Texas and it can get below freezing, as we all found out in the winter of 2013/2014.  But even though my water hose froze outside, inside we were as warm as toast.  Shown below is the  Space Heater I have;

 Space Heater 

I have listed some of the features of this unit below;

• Ceramic space heater with adjustable thermostat for comfortable warmth—ideal for home or office
• 1500-watt high setting; 3 output options: Low, High, or Fan Only; power indicator light lets you know when it’s plugged in
• For safety: tip-over switch with auto shut-off and overheat protection with auto shut-off; ETL listed
• Carrying handle for easy transport; not for use in bathrooms, laundry areas, or other high-humidity rooms

If you have a four-legged friend (Furkid) traveling with you, please take note: this unit comes with Auto Shut-Off.  If the Ceramic Heater is tipped over the heater shuts off automatically.  This is a very important feature if you are traveling with four-footed friends.  There are some clumsy two-legged friends out there as well.

Again I remind you that these LP Gas saving tips only work if you have access to a power pedestal so you can get AC power.  With these hints, the Propane Gas becomes the backup plan and not the main source of energy for your Rig.  I know from experience that these hints and tips will work.

Until next time.

And finally, please remember that this blog is an Amazon affiliate. When you order something through any of the Amazon links, it doesn’t add anything to your cost, but I do earn a small commission on everything you buy. 

Is It Level??? Is It Stable????

Is It Level??

How many times have I heard that phrase at a campground?  I can't even count them or remember them for that matter.  How do you know when your rig is level and what can you do if your rig is not?
Let's look at some of the possibilities.





The first thing you need to do is eyeball the site that you will back into or pull forward into.
Does the site appear flat?  There could be a drainage crown to the site, meaning that the center is higher than either side so that the rain water will drain off quickly if it does rain.
Maybe there is a slope in the site toward the right or left.
All of this needs to be taken into consideration when looking at the site.
Ok, you are pulling or backing into the site and you have the support of a ground crew so getting into the site is not the problem.  The door side of the rig appears lower that the street side or is it?   How do you know? Well at some point in the life of your rig someone should have put bubble levels on it.
(For you guys with money we will discuss auto leveling equipment at the end.)

They should look like theses RV Bubble Levels

RV Bubble Levels 

If you have nothing, or what you have is so small as not to be readable then an up-grade is in order.  You should mount one of these in the front of the rig where the level can be easily seen, after taking the rig to a Walmart type parking lot and using a construction level, checking that the rig is sitting truly level before you mount the above levels to the rig.  The second level is mount on the street side of the rig at the same height that you mounted the front of the rig level.  Be sure you have confirmed that construction level and the RV level agree that the rig is level.
Why you ask?  Because if you are more that 5 degrees out of level your RV refrigerator may not work or will not work efficiently.
But you may not have a TT maybe you have a 5th wheel and need something a bit bigger.  Enter the 5th wheel bubble level.  This is mounted on the pin box so you can see the level from the drivers seat.

5th Wheel Bubble Level

Even if you have auto-leveling on your fiver you want to start out as close to level as you can so as to not put to much stress on the self leveling system.

Ok, you have found that the door side of the rig is low and needs to be raised up to bring that side into level.
Now the fun begins.  You will need to put something under the wheels to raise that side of the rig.  You will need what is called a RV Tire Leveling Block,

RV Tire Leveling Block

RV Tire Leveling Block

These blocks interlock so they will stay put if more than one is used and they are designed not to sink into soft soil or blacktop.  Just how many you will need to level up the low side is often just simple trial and error.
I always start with one above ground level under each tire on the low side and go from there.  Let's say that you needed two under each tire on the low side to get level.

Did you remember to pull up on them and not try to back up on them?
Better for the tires if you pull up on the leveling block rather than backing up on them.

Also did you make sure all tires were centered on the blocks not on an edge?
The axle of the tire or the hub in the middle of the tire should be centered on the leveling block.
Why? Because it puts less stress on the tires, that really do not like being off the ground in space.

Here is yet another way to level your Rig.  This one is a bit different that the square block used above, this one is a Ramp Style Leveling System and will help you level your rig from any increment between 1/2 inch and 4 inches.  This ramp style will hold up to 30,000 pounds.  If you have two axles then you will require two ramps per side.

Ramp Style Leveling System

The smaller ramp is used to chock the RV from moving once the RV is level.  The ramp with the holes in it, is the adjusting ramp. 

You have check the levels on both the front and side of the rig right?  So now what?  You need to check that the fridge is level. On way to do that is to use a Torpedo Level

 Torpedo Level

This small 8" level can be use inside the fridge or on the nearest counter next to the fridge to check to be sure that the fridge is level. (Level - not more that five degrees out of level, is very important to the good, safe, and efficient operation of an RV fridge)

You are now level so what is next? Unhooking and stabilizing the rig.
Once you are unhooked you need to put down the corner stabilizer jacks.  Most travel trailers use Scissor Jacks

Scissor Jacks

This type of jack is NOT for leveling your rig.  It is to keep the rig from moving back and forth as you move around inside.  If one of the jacks does not meet the ground you can use one or more of  the tire leveling blocks to help stabilize that corner of the rig.  As shown in the above photo a hand crank is the normal method of deploying this type of jack and can be a real pain.  There are two fixes for the hand crank used on these jacks.  One is the Stabilize Scissor Jack Socket for an electric or battery operated drill.

stabilizing Scissor Jack Socket

The second but more expensive way is to motorize RV scissor stabilizing jacks

motorized RV scissor stabilizing jack

This jack is remote control and is powered off the rig so it makes the stabilizing fast and easy.

Many of the newer 5th wheels will have will have powered corner jacks and landing jacks.  Some will have auto leveling that will level and stabilize the fiver.  But what happens when you are still getting sea sick from someone walking inside the fifth wheel or travel trailer?
For the 5th wheel there are several things that can be used and have had success.
First is the Stabilizer Jack

5th Wheel Stabilizer Jack

I use these back at the bumper, where the bumper joins the frame of the fifth wheel.  The use of these has really made a difference in the movement of the trailer.

Next is the expandable wheel chock or X-chock.

X-Chock

This chock does double duty if you use a paddle lock to lock the chock from being removed it will stop someone from being able to steal your RV with-out a lot of work.

Your rig is now level and corner supported but, when someone walks around the inside of the rig it still does the shimmy, shimmy, shake.  Now what?  There are many suggested solutions out there to solve this problem but here is the simplest one that works.  The RV Stabilizer           

RV Stabilizer   

One of these can be added to the rear of the rig to stop side to side motion and or one can be added to the side of  the rig to stop the front to back motion.  This looks simple and it is but, it does work.

The X-Chock from above will also work on Travel Trailers to help stop motion and help to prevent theft as well.

OK, now for the guys with money.  If you would like to add remote control automatic power leveling jacks to your TT or 5er, the following is a company that has received good reviews for their lift systems; Big Foot Leveling System

Big Foot Flip Down Leveling Jack for TT

The type of DIY that is required to install this system is not in the scope of this blog.  But this type of wireless remote control system is out there and for those who would like to add automatic power leveling to their rig here is a place to start.






Until Next Time

And finally, please remember that this blog is an Amazon affiliate. When you order something through any of the Amazon links, it doesn’t add anything to your cost, but I do earn a small commission on everything you buy. Just click on an Amazon link, then shop as usual.